Auto Chassis Parts Transmission Systems Drive Shafts Outer CV Joint Factory 3910041B05
Auto Chassis Parts Transmission Systems Drive Shafts Outer CV Joint Factory 3910041B05
Auto Chassis Parts Transmission Systems Drive Shafts Outer CV Joint Factory 3910041B05

Auto Chassis Parts Transmission Systems Drive Shafts Outer CV Joint Factory 3910041B05

Model NO.:
3910041B05
Price:
USD 5.00-7.00 / sets
Delivery:
FOB
Minimum order quantity:
200 sets
Supply Ability:
300000 sets / Month
Country of Origin:
NINGBO /SHANGHAI/etc.
Quantity:
  • Place of Origin:CN;ZHE
  • OE NO.:3910041B05
  • Size:OEM Standard Size
  • Model Number:3910041B05
  • Brand Name:Neutral
  • Type:Outer C.V. Joint
  • Car Make:NISSAN
  • Warranty:2
  • Material:55# ,20CR ,GCR15
  • surface hardness:HRC58-62
  • heat treatment depth:0.8-1.2mm
  • precision of installation:≤0.03mm
  • certificate:TS16949
  • SORT:More than 1300
  • warehouse management: first in first out
  • Color:Grey, Silver, Black, Green
  • Fitting Position:Front Axle
  • Internal Teeth, wheel side:19
  • Outer gearing wheel side:23

Auto Chassis Parts Transmission Systems Drive Shafts Outer CV Joint 3910041B05

  Product Description                                            

7

 

CV Joint, how it works, symptoms

All front-wheel drive cars have Constant Velocity joints or CV joints on both ends of the drive shafts (half shafts).
Inner CV joints connect the drive shafts to the transmission, while the outer CV joints connect the drive shafts to the wheels. Many rear-wheel drive and four-wheel drive cars as well as trucks also have CV joints.
The CV joints are needed to transfer the torque from the transmission to the drive wheels at a constant speed, while accommodating the up-and-down motion of the suspension. In front-wheel drive cars, CV joints deliver the torque to the front wheels during turns. There are two most commonly used types of CV joints: a ball-type and a tripod-type. In front-wheel drive cars, ball-type CV joints are used on the outer side of the drive shafts (outer CV joints), while the tripod-type CV joints mostly used on the inner side (inner CV joints). 

 

  Detailed Images                                                  

3

CV Joint Problems                                                

Common CV Joint Problems

For smooth running, a CV joint uses a special lubricant that is packed in and then sealed by plastic or rubber boot secured with a pair of clamps. As long as that boot is undamaged, the CV joint should last a long time without maintenance.
It is more likely that your car will rust through before the CV joint goes. However, a damaged or cracked protective boot opens up a whole world of pain as lubricant spills out and water infiltrates the joint.
This causes the CV joint to corrode and fail. Outer boots seem to be the more vulnerable ones, probably because they must withstand more motion than do the inner boots.
A properly trained and certified technician will inspect your CV boots for tears, cracks and other damage whenever you bring your vehicle in for scheduled care.

11

Quality evaluation                                                 

  Production Workshop                                         

_20170830153052

 

  Our Delivery                                                        

  FAQ                                                                     

Q1. What is your terms of packing?
A: Generally, we pack our goods in neutral white boxes and brown cartons. If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.

Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.

Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.

Q4. How about your delivery time?
A: Generally, it will take 25 to 40 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.

Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.

Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery

Q8: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.

Sorry! No related records found.

Send Message

*
*
*

Send Message

*
*
*
Choose language